Battery powered Portable Clamp on Flow Meter LCD Display 4-20mA water Ultrasonic Flow Meter
Ultrasonic Flow Meter
Ultrasonic flow meter is designed to measure the fluid velocity of liquid within a closed conduit. The transducers are a non-contacting, clamp-on type, which will provide benefits of non-fouling operation and easy installation.
Ultrasonic flow meter is designed to measure the fluid velocity of liquid within a closed conduit. The transducers are a non-contacting, clamp-on type, which will provide benefits of non-fouling operation and easy installation.
This flowmeter can be virtually applied to a wide range of measurements. A variety of liquid applications can be accommodated: ultra-pure liquids, potable water, chemicals, raw sewage, reclaimed water, cooling water, river water, plant effluent, etc. Because the instrument and transducers are non-contacting and have no moving parts, the flow meter can not be affected by system pressure, fouling or wear. Standard transducers are rated to 110 ºC. Higher temperatures can be accommodated.
Additional information
Linearity | 0.5% |
Repeatability | 0.2% |
Accuracy | ±1% of reading at rates>0.2 mps |
Response Time | 0-999 seconds, user-configurable |
Velocity | ±32 m/s |
Pipe Size | DN15mm-6000mm |
Rate Units | Meter, Feet, Cubic Meter, Liter, Cubic Feet, USA Gallon, Imperial Gallon, Oil Barrel, USA Liquid Barrel, Imperial Liquid Barrel, Million USA Gallons. Users configurable |
Totalizer | 7-digit totals for net, positive and negative flow respectively |
Liquid Types | Virtually all liquids |
Security | Setup values Modification Lockout. Access code needs unlocking |
Display | 4x8 Chinese characters or 4x16 English letters |
Communication Interface | RS-232C, baud-rate: from 75 to 57600. Protocol made by the manufacturer and compatible with that of the FUJI ultrasonic flow meter. User protocols can be made on enquiry. |
Transducers | Model M1 for standard, other 3 models for optional |
Transducer Cord Length | Standard 2x5 meters, optional 2x 10 meters |
Power Supply | 3 AAA Ni-H built-in batteries. When fully recharged it will last over 10 hours of operation.100V-240VAC for the charger |
Data Logger | Built-in data logger can store over 2000 lines of data |
Manual Totalizer | 7-digit press-key-to-go totalizer for calibration |
Housing Material | ABS |
Case Size | 100x66x20mm |
Handset Weight | 514g (1.2 lbs) with batteries |